Effect of wall thickness on film cooling effectiveness: numerical simulation

LI Guangchao; PENG Ningjian; ZHANG Wei; KOU Zhihai; MAO Xiaodong; ZHANG Guochen

English

您当前的位置：

首页 >

文章列表页 >

Effect of wall thickness on film cooling effectiveness: numerical simulation

Thermal Power Generation Vol. 46, Issue 9, Pages: 59-64(2017)

更新时间：2025-09-28

- Effect of wall thickness on film cooling effectiveness: numerical simulation
- 作者机构：
  
  沈阳航空航天大学辽宁省航空推进系统先进测试技术重点实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC： TK471
- Published：2017
- 稿件说明：
移动端阅览
LI Guangchao, PENG Ningjian, ZHANG Wei, et al. Effect of wall thickness on film cooling effectiveness: numerical simulation[J]. Thermal Power Generation, 2017, 46(9): 59-64.
DOI：

LI Guangchao, PENG Ningjian, ZHANG Wei, et al. Effect of wall thickness on film cooling effectiveness: numerical simulation[J]. Thermal Power Generation, 2017, 46(9): 59-64. DOI：

摘要

为了探讨薄壁尺寸对气膜冷却效率影响

对壁厚为1倍、2倍和3倍孔径结构下游流场、温度场及气膜冷却效率进行了数值模拟研究。结果表明:壁厚为1倍孔径时气膜孔出口截面处出现高速区

使气膜孔出口垂直主流方向射流动量大

促进冷气被抬离壁面

气膜孔出口展向速度指向孔中心线

减弱气膜展向扩散性;在吹风比为1.0、1.5和2.0时

壁厚为1倍孔径结构的展向平均气膜冷却效率比壁厚为3倍孔径结构分别低9%~45%、21%~43%和9%~62%;壁厚为2倍和3倍孔径结构的展向平均气膜冷却效率相差较小。

Abstract

To explore the influence of thin wall size on film cooling performance

numerical simulation was carried out to investigate the flow field

temperature field and cooling effectiveness under conditions with wall thickness of one time

two times and three times of diameter of the film-cooling hole.The results show that

high-speed region appears at the hole exit with the wall thickness of one time of the hole diameter

resulting in an increase in the jet momentum and promoting the coolant being lifted off the wall.The lateral velocity of the coolant is towards to the center line of the hole

which weakens the spanwise diffusion.Compared with the wall thickness of three times of the hole diameter

the values of spanwise averaged film cooling effectiveness for one times of the hole diameter are about 9%~45%

21%~43% and 9%~62% lower at blowing ratios of 1.0

1.5 and 2.0

respectively.There is little difference in spanwise averaged film cooling effectiveness between the wall thickness of two times and three times of the hole diameter.

关键词

Keywords

references

Views

139

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

Influence of coolant crossflow on film cooling effectiveness of one-inlet and double-outlet injection holes

Investigation on film cooling effectiveness of fanned hole with broad outlet

Numerical study on cooling performance of Nekomimi film holes

Effect of blowing ratio on film cooling efficiency of trailing edge on turbine blade

Effect of double rows of film holes interaction on film cooling efficiency

Related Author

ZHANG Wei

LI Guangchao

KOU Zhihai

ZHAO Guochang

CHEN Yukai

YU Feilong

XIAO Junfeng

GAO Song

Related Institution

School of Aerospace Engineering, Shenyang University of Aeronautics and Astronautics

Xi'an Thermal Power Research Institute Co., Ltd

Department of Aerospace Engineering, Shenyang University of Aeronautics and Astronautics

School of Mechanical Science and Engineering, Huazhong University of Science and Technology

Robotics College of Guangdong Institute of Technology

AI问答

⁰