Numerical simulation of inner abrasion in a selective catalytic reduction deNO<sub>x</sub> device

ZHONG Yafei; WEI Hongqi; CHEN Jingwei

English

您当前的位置：

首页 >

文章列表页 >

Numerical simulation of inner abrasion in a selective catalytic reduction deNO_x device

Thermal Power Generation Vol. 45, Issue 3, Pages: 75-81(2016)

更新时间：2025-09-28

- Numerical simulation of inner abrasion in a selective catalytic reduction deNO_x device
- 作者机构：
  
  东南大学能源与环境学院
- 作者简介：
- 基金信息：
- DOI：
  CLC： X773
- Published：2016
- 稿件说明：
移动端阅览
ZHONG Yafei, WEI Hongqi, CHEN Jingwei. Numerical simulation of inner abrasion in a selective catalytic reduction deNO_x device[J]. Thermal Power Generation, 2016, 45(3): 75-81.
DOI：

ZHONG Yafei, WEI Hongqi, CHEN Jingwei. Numerical simulation of inner abrasion in a selective catalytic reduction deNO_x device[J]. Thermal Power Generation, 2016, 45(3): 75-81. DOI：

摘要

为解决选择性催化还原(SCR)脱硝装置在运行中出现的喷氨喷嘴和催化剂层严重磨损问题

采用GAMBIT软件模拟脱硝装置内部流场的速度分布

并通过现场冷态试验验证模型的有效性。模拟结果表明:SCR脱硝装置入口处烟道存在上下或左右倾斜

整流格栅和转向弯头处存在高度差

使得烟气经过整流格栅后进入催化剂层的速度分布不均匀

导致喷氨喷嘴和催化剂层磨损;本文在数值模拟中改变引起流场分布不均的结构

能够解决其所造成的脱硝装置磨损问题;模拟结果与实际磨损状况一致

说明本文所用数值模型能准确模拟脱硝装置速度分布。

Abstract

To solve the problem of severe abrasion of the ammonia injection spray nozzle and catalyst layer in selective catalytic reduction(SCR)equipment

the velocity distribution of the flow field in the internal flow field was simulated using GAMBIT software.The applied simulation model was verified through field cold test.The results show that the SCR denitration device has a high degree of difference between the top and bottom of the flue gas entrance

the rectifier grid and the steering elbow

which makes the gas flow through the rectifier grid into the catalyst layer.In the numerical simulation

the structure of the flow field distribution is changed

which can solve the abrasion problem of denitration device caused by the uneven distribution of the flow field.The numerical model can accurately simulate the velocity field distribution in the SCR device.

关键词

Keywords

references

Views

137

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

STRUCTURE DESIGN OF BAFFLE PLATES IN SCR DENITRIFICATION REACTOR

Mechanism research on catalyst attrition in SCR denitration system and the treatment

Adding groove intertial separator at SCR reactor inlet:numerical simulation and design optimization

STUDY ON BEHAVIOR OF CATALYCTS FOR SCR DENITRIFICATION USING DIFFERENT TiO₂ AS CARRIER

NUMERICAL SIMULATION OF THE FLOW FIELD IN FURNACE OF SUPERCRTICAL CFB BOILER

Related Author

XU Yan

LI Wen-yan North China Electric Power University

AN Jingxue

WANG Lei

QIN Qi

CHENG Jinwu

LI Youxin

HONG Wenpeng

Related Institution

Department of Power Engineering, North China Electric Power University

China Datang Group Science and Technology Research Institute Co., Ltd. Huazhong Branch

School of Energy and Power Engineering, Northeast Electric Power University

Guodian Longyuan Energy saving Technology Co., Ltd

Southeast University

AI问答

⁰

Numerical simulation of inner abrasion in a selective catalytic reduction deNOx device

DOI：

摘要

Abstract

关键词

Keywords

references

Numerical simulation of inner abrasion in a selective catalytic reduction deNO_x device