Integration of CO<sub>2</sub> capture device and power plant:numerical simulation

LYU Tai; MA Junkunpeng; HAN Guofu; LIU Lianbo; NIU Hongwei; GAO Shiwang

English

您当前的位置：

首页 >

文章列表页 >

Integration of CO₂ capture device and power plant:numerical simulation

Thermal Power Generation Vol. 44, Issue 4, Pages: 27-32(2015)

更新时间：2025-09-28

- Integration of CO₂ capture device and power plant:numerical simulation
- 作者机构：
  
  1. 东北电力大学能源与动力工程学院
  2. 内陆港开发有限公司
  3. 中国华能集团清洁能源技术研究院有限公司
- 作者简介：
- 基金信息：
- DOI：
  CLC： TM621
- Published：2015
- 稿件说明：
移动端阅览
LYU Tai, MA Junkunpeng, HAN Guofu, et al. Integration of CO₂ capture device and power plant:numerical simulation[J]. Thermal Power Generation, 2015, 44(4): 27-32.
DOI：

LYU Tai, MA Junkunpeng, HAN Guofu, et al. Integration of CO₂ capture device and power plant:numerical simulation[J]. Thermal Power Generation, 2015, 44(4): 27-32. DOI：

摘要

电厂CO2捕集技术主要以燃烧后CO2捕集技术为主

其具有改造成本低、捕集效率高等特点。以超超临界600 MW机组HG-1793/26.15-YM1燃煤锅炉为例

利用Thermoflow软件

分别对燃烧系统、汽水系统、冷却系统进行模拟计算

提出了CO2捕集装置与现役超临界机组的集成优选方案。结果表明:脱碳机组集成后

CO2捕集效率为90%时

集成机组净效率下降10.87%

燃煤量增加17.61%

CO2排放量降至90.55g/(kW·h)

SOx排放量由0.042 2g/(kW·h)降至接近0。

Abstract

At present

the main CO2 capture technology for power plants is post combustion CO2 capture

which has advantages of low cost in reforming and high capture efficiency.Taking the HG-1793/26.15-YM1 boiler in an ultra supercritical 600 MW unit as an example

the Thermoflow software was adopted to carry out simulation investigation on the combustion system

steam water system and cooling system in detail

and the system integrated scheme was put forward.The results show that

with the CO2 capture efficiency of 90%

the integrated unit's net efficiency will decrease by 10.87%

the coal consumption will increase by 17.61%

the CO2 emission will reduce to 90.55g/(kW·h)and the SOxemission will also drop from 0.042 2g/(kW·h)to near-zero.

关键词

Keywords

references

Views

156

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

ANALYSIS AND DISPOSAL OF VIBRATION ON ULTRA-SUPERCRITICAL TURBO-GENERATOR SET

INFLUENCE OF OVER-FIRED AIR ADJUSTMENT IN BOILER FOR IMPORTED ULTRA-SUPECRITICAL 600 MW UNIT UPON NO_x EMISSION AND ECONOMIC EFFICIENCY IN OPERATION OF THE BOILER

OPTIMIZATION OF CONTROL STRATEGE FOR TEMPERATURE-REDUCING REGULATION OF LOW-PRESSRUE SHAFT SEAL ON STEAM TURBINES

STUDY ON ANALYSIS AND APPLICATION OF CHARACTERISTIC FLOW PASSAGE AREA IN STEAM TURBINES

Water flow control during start-up of an ultra supercritical 600MW unit once-through boiler with circulating pump

Related Author

CHEN Hua-gui1

TIAN Li21.Jiangsu Provincial Electric Power Testing and Research Institute Co Ltd

LIU Qi1

L Guo-qiang1

YU Cun-xi1

ZHANG Yue-hai21.Xi'an Thermal Power Research Institute Co Ltd

CHEN Zhigang1

ZHAO Zhidan1

Related Institution

Jiangsu Electric Power Test and Research Institute Co., Ltd

Nanjing University of Aeronautics and Astronautics Jincheng College

Xi'an Thermal Power Research Institute Co., Ltd

Hangzhou Quality and Technical Supervision and Testing Institute

Guangdong Heyuan Power Plant

AI问答

⁰

Integration of CO2 capture device and power plant:numerical simulation

DOI：

摘要

Abstract

关键词

Keywords

references

Integration of CO₂ capture device and power plant:numerical simulation