An effective defoamer for seawater once-through cooling system

ZHANG Anqi; LI Jianxi; TANG Sanyou; ZHANG Xiaogang; HE Yong

English

您当前的位置：

首页 >

文章列表页 >

An effective defoamer for seawater once-through cooling system

Thermal Power Generation Vol. 43, Issue 12, Pages: 139-142(2014)

更新时间：2025-09-28

- An effective defoamer for seawater once-through cooling system
- 作者机构：
  
  西安热工研究院有限公司
- 作者简介：
- 基金信息：
- DOI：
  CLC： TQ423.95
- Published：2014
- 稿件说明：
移动端阅览
ZHANG Anqi, LI Jianxi, TANG Sanyou, et al. An effective defoamer for seawater once-through cooling system[J]. Thermal Power Generation, 2014, 43(12): 139-142.
DOI：

ZHANG Anqi, LI Jianxi, TANG Sanyou, et al. An effective defoamer for seawater once-through cooling system[J]. Thermal Power Generation, 2014, 43(12): 139-142. DOI：

摘要

滨海发电厂利用海水作为冷却用水时

直流冷却系统存在泡沫严重问题。对此

通过优化配方及乳化工艺

研制出一种专用消泡剂。研究结果表明

当硅膏∶聚醚改性聚硅氧烷质量比为9∶1

乳化剂HLB值为9.5

乳化剂用量为5%

乳化温度70℃时

制备出的消泡剂性能最佳。投加固含量

40%的消泡剂

28mg/L消泡及抑泡率即可达到100%

性能明显优于其他同类消泡剂

可有效解决海水直流冷却系统的泡沫问题。

Abstract

Aiming at the serious foaming problems existing in cooling system when using seawater as the cooling water in power plants

an effective defoamer was developed to inhibit the foaming.The recipe optimization shows that when the mass ratio of silicon cream to polyether-polysiloxane is 9to 1

the HLB value of emulsifier is 9.5

the mass fraction of the emulsifier is 5% and the emulsification temperature is 70 ℃

the defoamer prepared performs the best.At the addition of 28mg/L

the defoaming rate of 40% defoamer liquid can reach 100%

proving that the prepared defoamer can solve the foaming problems effectively.

关键词

Keywords

references

Views

151

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

No data

Related Author

No data

Related Institution

No data

AI问答

⁰