Reason analysis on abrasion and ash leakage of bell-type air nozzle in a circulating fluidized bed boiler

HUANG Zhong

English

您当前的位置：

首页 >

文章列表页 >

Reason analysis on abrasion and ash leakage of bell-type air nozzle in a circulating fluidized bed boiler

Thermal Power Generation Vol. 43, Issue 4, Pages: 102-105(2014)

更新时间：2025-09-28

- Reason analysis on abrasion and ash leakage of bell-type air nozzle in a circulating fluidized bed boiler
- 作者机构：
  
  中国华能集团清洁能源技术研究院有限公司
- 作者简介：
- 基金信息：
- DOI：
  CLC： TK229.66
- Published：2014
- 稿件说明：
移动端阅览
HUANG Zhong. Reason analysis on abrasion and ash leakage of bell-type air nozzle in a circulating fluidized bed boiler[J]. Thermal Power Generation, 2014, 43(4): 102-105.
DOI：

HUANG Zhong. Reason analysis on abrasion and ash leakage of bell-type air nozzle in a circulating fluidized bed boiler[J]. Thermal Power Generation, 2014, 43(4): 102-105. DOI：

摘要

钟罩式风帽在大型循环流化床(CFB)锅炉中普遍采用

随着锅炉运行时间的增加其漏渣和磨损问题日益突出

影响锅炉的安全性和稳定性。对其成因进行分析研究

发现芯管顶部与风帽外罩间隙是产生钟罩式风帽漏渣及磨损的重要原因

通过数值模拟分析了不同间隙下的风帽阻力特性。结果表明

芯管顶部与风帽外罩之间存在1mm间隙时风帽阻力下降9.1%

存在3mm间隙时风帽阻力下降21.8%

存在5mm间隙时风帽阻力下降30.8%

间隙的存在严重破坏了钟罩式风帽的阻力特性。此外

钟罩式风帽外罩出口小孔设置方式对漏渣和磨损也有不良影响

风帽外罩小孔可以考虑向下倾斜开设。

Abstract

The bell-type air nozzle is commonly used in large scale circulating fluidized bed(CFB) boilers.However

ash leakage and abrasion occurs on a great number of the bell-type air nozzles during practical operation

and turns worse with the boiler service time

which finally affects safety and stability of the boiler.Analysis for this problem shows the gap between core tube top and the air nozzle clothing is the major reason.The resistance performance of the air nozzle with different gaps was numerically investigated.The results show that

the resistance of the air nozzle dropped by 9.1%

21.8%and 30.8% when the gap was 1mm

3mm and 5mm

respectively

indicating the gap has seriously damaged the resistance of the air nozzle.Besides

the setting mode of the hole at outlet of the bell-type air nozzle also had a bad effect on ash leakage and abrasion.It suggested the hole can be downward declined.

关键词

Keywords

references

Views

133

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

Experimental study on fluidization characteristics of bell-type air nozzle in large scale CFB boiler

DESIGN OF CONTROL SYSTEM FOR HOMEMADE 410 t/h CFB BOILERS

APPLICATION OF FACTOR ANALYSIS IN STUDY ON THERMAL EFFICIENCY OF CFB BOILERS

ANALYSIS OF OPERATION PROBLEMS CONCERNING AIR-AND-WATER JOINTLY OPERATED SLAG COOLER OF A 440t/h CFB BOILER AND IMPROVEMENT THEREOF

HYDRODYNAMIC CALCULATION OF 600 MW SUPERCRITICAL CFB BOILER

Related Author

CHEN Zixi

LU Xiaofeng

FAN Huiyong

LONG Xiaofei

FAN Liyuan

LIU Shirong

WANG Quanhai

LI Jianbo

Related Institution

Key Laboratory of Low Grade Energy Utilization Technology and Systems, Ministry of Education, Chongqing University

Datang Wu'an Power Generation Co., Ltd

Xi'an Thermal Power Research Institute Co., Ltd

Honghe Chemical Co., Ltd

Xi'an Thermal Power Research Institute Co.,Ltd.

AI问答

⁰