Experimental study on heat transfer performance of filler-plate combination evaporative coolers

SHI Zhongjing; SHI Yunyi; QIAN Tailei; GUO Zhen; ZHU Dongsheng

English

您当前的位置：

首页 >

文章列表页 >

Experimental study on heat transfer performance of filler-plate combination evaporative coolers

Thermal Power Generation Vol. 43, Issue 3, Pages: 65-70(2014)

更新时间：2025-09-28

- Experimental study on heat transfer performance of filler-plate combination evaporative coolers
- 作者机构：
  
  华东理工大学承压系统与安全教育部重点实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC： TQ051.5
- Published：2014
- 稿件说明：
移动端阅览
SHI Zhongjing, SHI Yunyi, QIAN Tailei, et al. Experimental study on heat transfer performance of filler-plate combination evaporative coolers[J]. Thermal Power Generation, 2014, 43(3): 65-70.
DOI：

SHI Zhongjing, SHI Yunyi, QIAN Tailei, et al. Experimental study on heat transfer performance of filler-plate combination evaporative coolers[J]. Thermal Power Generation, 2014, 43(3): 65-70. DOI：

摘要

设计了一种新型填料组合板蒸发式冷却器

其将填料与换热板片叠加作为换热元件

通过混合冷却的方式强化传热。搭建了组合板蒸发式冷却器性能测试实验系统

研究了喷淋密度、风量、环境湿球温度及填料层数对组合板蒸发式冷却器传热性能的影响。结果表明:增加风量和喷淋水流量

可以提高蒸发式冷却器的冷却效率

并存在最佳喷淋密度;实验中当空气湿球温度上升9℃

板内工质的出口温度升高2℃

冷却效率提高了3%;相同喷淋密度或空气流速下

热流密度随填料层厚度的增加而增大。

Abstract

A new type filler-plate combination evaporative cooler is designed.The fillers and heat exchanger plates which overlap together are used as heat exchanger components.Thus

the heat transfer is enhanced by mixed strengthened cooling between the fillers and the plates.Moreover

a plate evaporator cooler performance test system was built to study the influence of spray density

air volume

ambient wet bulb temperature and flier layer on plate evaporator cooler's heat transfer property.The results show that:increasing the air volume and spray water flow can improve cooling efficiency of the evaporative cooler

and there is an optimum spray density;during the experiment

when the air wet bulb temperature rises by 9℃

the outlet temperature of working fluid in plates increases by 2℃ and the cooling efficiency is improved by 3%;with the same spray density or air flow

the heat density increases with the filler layer thickness.

关键词

Keywords

references

Views

119

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

Numerical simulation on flow and thermal performance of water-in-glass evacuated elliptical tube solar collector

Discussions on tube bundle arrangement factor for condensers in steam turbines

Effects of unsteady wake on heat transfer performance of compound angle blade:numerical simulation

EXPERIMENTAL INVESTIGATION ON HEAT TRANSFER COEFFICIENT OF CFB BOILER IN GAOBA POWER PLANT

NEW METHOD OF CALCULATING REDUNDANT AREA FOR HEAT EXCHANGERS

Related Author

JIANG Chuan

LI Tong

TAO Hanzhong

ZHANG Changmi

HAN Chenglong

CHENG Haoran

ZENG Shenfu

ZHANG Li

Related Institution

School of Energy and Environment, Southeast University

School of Energy Science and Engineering, Nanjing Tech University

Shenzhen Cooperative Power Technology Co.,Ltd.

College of Energy & Mechanical Engineering,Shanghai University of Electric Power

Huaneng Yuhuan Power Plant

AI问答

⁰