TEST STUDY ON SULPHER FIXATION IN THE FURNACE AFTER ADDING COMPOSITE SULFER FIXATION AGENT

BAI Peng1; LIU Hao1; FENG Qianwei1; ZHAO Ran1; YAN Zhiqiang1; QIU Jianrong1; KONG Fanhai2 1.State-level Key Laboratory of Coal Combustion

English

您当前的位置：

首页 >

文章列表页 >

TEST STUDY ON SULPHER FIXATION IN THE FURNACE AFTER ADDING COMPOSITE SULFER FIXATION AGENT

Thermal Power Generation Vol. 41, Issue 5, Pages: 39-42(2012)

更新时间：2025-09-28

- TEST STUDY ON SULPHER FIXATION IN THE FURNACE AFTER ADDING COMPOSITE SULFER FIXATION AGENT
- 作者机构：
  
  1. 华中科技大学煤燃烧国家重点实验室
  2. 西安热工研究院有限公司,苏州
- 作者简介：
- 基金信息：
- DOI：
  CLC： X701.3
- Published：2012
- 稿件说明：
移动端阅览
BAI Peng1, LIU Hao1, FENG Qianwei1, et al. TEST STUDY ON SULPHER FIXATION IN THE FURNACE AFTER ADDING COMPOSITE SULFER FIXATION AGENT[J]. Thermal Power Generation, 2012, 41(5): 39-42.
DOI：

BAI Peng1, LIU Hao1, FENG Qianwei1, et al. TEST STUDY ON SULPHER FIXATION IN THE FURNACE AFTER ADDING COMPOSITE SULFER FIXATION AGENT[J]. Thermal Power Generation, 2012, 41(5): 39-42. DOI：

摘要

在实验室水平管式炉及1 000MW机组锅炉上对添加以碱土金属Ca、Ba、Sr盐为主的复合固硫剂后炉内的固硫效果进行了研究

分析了复合固硫剂添加比例对固硫效率、灰分中SO3含量、硫分布特性和锅炉燃烧的影响。结果表明:复合固硫剂添加比例分别为0.5%、1%、2%时

在水平管式炉内固硫效率分别达到9.2%、22.4%、52.4%

在1 000MW机组锅炉的固硫效率分别达到6.6%、15.8%、23.6%。随复合固硫剂添加比例的增大

烟气中含硫量占炉前煤总硫量比例减小

灰分中含硫量占炉前煤总硫量比例加大

固硫效果显著。

Abstract

The effectiveness of sulpher fixation in the furnace after adding composite sulpher fixation agent which takes alkaline-earth metal Ca

Sr salt as the main components has been studied on the horizontal pipes' furnace in laboratory and in the boiler of 100 MW unit

the influence of adding ratio concerning composite sulpher fixation agent upon the sulpher fixation efficiency

the SO3 content in fly ash

the sulpher distribution characteristics

and the combustion in boiler being analysised.Results show that the sulpher fixation efficiency in horizontal pipes' furnace reachs 9.2%

22.4%

and 52.4% respectively as the adding ratio of composite sulpher fixation agent being 0.5%

and 2% respectively

and teh sulpher fixation efficiency in boiler of 100 MW unit reaches 6.6%

15.8%

and 23.6% respectively.Along with increasing teh adding ratio of composite sulpher fixation agent

the ratio of sulpher content in flue gas to the total sulpher in coal before entering teh furnace decreases

but the sulpher content in fly ash to the total sulpher in coal before entering the furnace increases

the effectiveness of sulpher fixation being remarkable.

关键词

Keywords

references

Views

118

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

CAUSES LEADING TO SLAGGING IN FURNACE OF TANGENTIAL FIRING PULVERIZED COAL BOILER AND PREVENTIVE MEASURES THEREOF

RETROFITTING OF AUXILIARY VALVE FOR SOLENOID BLOWOUT VALVES

STUDY ON TEMPERATURE FIELD MEASUREMENT IN FURNACE AND COMBUSTION DIAGNOSIS METHOD BASED ON DIGITAL IMAGE PROCESSING AND NEURAL NETWORK

STUDY ON SCHEME OF PREVENTING A 200T/H COALFIRING BOILER FROM SLAGGING PROBLEMS

CAUSE ANALYSIS OF FURNACE WALL VIBRATION FOR UTILITY BOILERS

Related Author

HU Min

RAO Supo

LUO Sheng

ZHANG Yu jie

Wu Ping lin

LU L ming

HU Dianru

ZHANG Bo

Related Institution

Shajiao C Power Plant

Guangdong Yuedian Group Co., Ltd.

The Pearl River Power Plant Guangdong

Shaanxi University of Science and Technology

AI问答

⁰