WELDING TECHNOLOGY OF STEEL 91 USED IN POWER PLANTS AND STUDY ON ITS POST-WELDING BEHAVIOR

LIU Minli Department of metallorgy and Material Engineering

English

您当前的位置：

首页 >

文章列表页 >

WELDING TECHNOLOGY OF STEEL 91 USED IN POWER PLANTS AND STUDY ON ITS POST-WELDING BEHAVIOR

Thermal Power Generation Vol. 40, Issue 2, Pages: 88-90(2011)

更新时间：2025-09-28

- WELDING TECHNOLOGY OF STEEL 91 USED IN POWER PLANTS AND STUDY ON ITS POST-WELDING BEHAVIOR
- 作者机构：
  
  内蒙古机电职业技术学院冶金与材料工程系
- 作者简介：
- 基金信息：
- DOI：
  CLC： TG457.11
- Published：2011
- 稿件说明：
移动端阅览
LIU Minli Department of metallorgy and Material Engineering. WELDING TECHNOLOGY OF STEEL 91 USED IN POWER PLANTS AND STUDY ON ITS POST-WELDING BEHAVIOR[J]. Thermal Power Generation, 2011, 40(2): 88-90.
DOI：

LIU Minli Department of metallorgy and Material Engineering. WELDING TECHNOLOGY OF STEEL 91 USED IN POWER PLANTS AND STUDY ON ITS POST-WELDING BEHAVIOR[J]. Thermal Power Generation, 2011, 40(2): 88-90. DOI：

摘要

对P91钢在发电机组应用中容易出现的接头脆化和裂纹等问题

采取了相应的焊接工艺

并通过冲击、拉伸和弯曲试验检测其焊接性能。结果表明

采用相应的焊接工艺

P91钢焊接接头可以获得良好的韧性和强度。此外

弯曲试验后试件也未发现裂纹

保证了P91钢的安全使用。

Abstract

Directing against the problems easily occurred in application of steel 91 onto power-generating units

such as embrittlement and cracking etc.

corresponding weld technology has been adopted

and the weldability of steel 91 being inspected through impact test

tensile test

and bend test.Results show that the good toughness and strength of weld joints can be obtained by adopting corresponding weld technology for steel 91.Moreover

cracks haven't discovered on the specimen even after bend test

ensuring safety in application of steel 91.

关键词

Keywords

references

Views

131

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

CAUSE ANALYSIS OF CRACKS OCCURRED IN ANGLE-WELDING SEAM ON INLET HEADER OF LOW-TEMPERATURE SUPERHEATER

Reason analysis on crack appeared in welded joints of dissimilar heat-resistant steel T91/HR3C

Welding repair technology for cracks on high pressure cylinder in a nuclear power plant

Crack detection and structure optimization for fillet welds in nozzle stubs of deaerator spray pipes

Mechanical properties and anti-abrasion performance of 00Cr13Ni4Mo super martensitic stainless steel

Related Author

LIU Guo-gang2 1.Shandong Electric Power Reseach Institute

WANG Jin-hai2

YU Guang-qiang2

YUE Zeng-wu1

HU Xin-fang1

YUE Qiongguo2

TIAN Tian3 1.Xi'an Thermal Power Research Institute Co.Ltd.

ZHOU Ning1

Related Institution

Shandong Electric Power Research Institute

Huaneng Dezhou Power Plant

Xi'an Thermal Power Research Institute Co., Ltd

Hainan Nuclear Power Co., Ltd

CGN Engineering Co., Ltd

AI问答

⁰