HARDNESS CONTROL FOR BASE MATERIAL AND WELDED JOINTS OF 9%～12% Cr MARTENSITE STEEL

LI Yi-min; YANG Bai-xun; CUI Xiong-hua; HAN Chuan-gao; SHANG Hai-junXi'an Thermal Power Research Institute Co Ltd

English

您当前的位置：

首页 >

文章列表页 >

HARDNESS CONTROL FOR BASE MATERIAL AND WELDED JOINTS OF 9%～12% Cr MARTENSITE STEEL

Thermal Power Generation Vol. 39, Issue 3, Pages: 57-60(2010)

更新时间：2025-09-28

- HARDNESS CONTROL FOR BASE MATERIAL AND WELDED JOINTS OF 9%～12% Cr MARTENSITE STEEL
- 作者机构：
  
  西安热工研究院有限公司
- 作者简介：
- 基金信息：
- DOI：
  CLC： TG457.11
- Published：2010
- 稿件说明：
移动端阅览
LI Yi-min, YANG Bai-xun, CUI Xiong-hua, et al. HARDNESS CONTROL FOR BASE MATERIAL AND WELDED JOINTS OF 9%～12% Cr MARTENSITE STEEL[J]. Thermal Power Generation, 2010, 39(3): 57-60.
DOI：

LI Yi-min, YANG Bai-xun, CUI Xiong-hua, et al. HARDNESS CONTROL FOR BASE MATERIAL AND WELDED JOINTS OF 9%～12% Cr MARTENSITE STEEL[J]. Thermal Power Generation, 2010, 39(3): 57-60. DOI：

摘要

对P91钢母材及焊缝硬度与强度、冲击功及断裂韧度的关系进行的试验研究表明

当硬度低于180 HB时

P91钢母材及焊缝的强度不满足相关标准要求;当硬度高于270 HB时

焊缝的冲击功不满足相关标准的要求。试验结果与9%～12%Cr马氏体耐热钢的硬度控制判据相吻合。

Abstract

The test study carried on the relationship between hardness and strength

impact work

and fracture toughness for base material and welded joints of P91 steel shows that the strength of base material and welded joints of P91 steel can't satisfy the requirements specified in related standards in the event of hardness being lower than 180 HB;the impact work of welded joints can't satisfy requirements stipulated in related standards in the case of hardness being higher than 270 HB.The result of test tallies well with the criteria of hardness control for 9%～12% Cr Martensite heat-resisiting steel.

关键词

Keywords

references

Views

268

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

STUDY ON PERFORMANCE OF HIGH HARDNESS AND LOW HARDNESS WELD JOINTS ON P91 MAIN STEAM PIPE

ANALYSIS OF QUALITY FOR GH4145/SQ BOLTSTEEL IN ONE POWER PLANT

STUDY ON AND ANALYSIS OF PROBLEM CONCERNING BOLT HARDNESS BEYOND STANDARD SET FOR STEAM TURBINES

TEST OF HARDNESS VARIATION AFTER AGING AND STUDY ON CREEP PROPERTY FOR T92 STEEL

INFLUENCE OF LOWERING ALLOWABLE STRESS FOR T122 STEEL UPON SAFETY OF BOILERS

Related Author

GUI Li-cheng2(1.Xi'an Thermal Power Research Institute Co Ltd

WANG Da-guang2

YAN Jian-bin2

CAI Lian-yuan2

SHI Zhi-gang1

LI Yi-min1

KE Hao

YANG Jian-ju

Related Institution

Xigu Thermal Power Co., Ltd

Hebei Electric Power Research Institute

Harbin Turbine Works Co., Ltd

North China Electric Power Research Institute Co., Ltd

Key Laboratory of Power Station Equipment Status Monitoring and Control, Ministry of Education, North China Electric Power University

AI问答

⁰