APPLICATION OF A MULTI-LAYER RADIAL BASIS NETWORK MODEL IN CALCULATION OF SPECIFIC ENTHALPY FOR EXHAUST STEAM FROM THE FINAL STAGE OF STEAM TURBINE

ZHANG Li-ping1; XU Qi1; WANG Wei-feng21.North China College of Water Conservancy and Hydro Power

English

您当前的位置：

首页 >

文章列表页 >

APPLICATION OF A MULTI-LAYER RADIAL BASIS NETWORK MODEL IN CALCULATION OF SPECIFIC ENTHALPY FOR EXHAUST STEAM FROM THE FINAL STAGE OF STEAM TURBINE

Thermal Power Generation Vol. 38, Issue 7, Pages: 80-82(2009)

更新时间：2025-09-28

- APPLICATION OF A MULTI-LAYER RADIAL BASIS NETWORK MODEL IN CALCULATION OF SPECIFIC ENTHALPY FOR EXHAUST STEAM FROM THE FINAL STAGE OF STEAM TURBINE
- 作者机构：
  
  1. 华北水利水电学院动力系
  2. 西安热工研究院有限公司
- 作者简介：
- 基金信息：
- DOI：
  CLC： TK262
- Published：2009
- 稿件说明：
移动端阅览
ZHANG Li-ping1, XU Qi1, WANG Wei-feng21.North China College of Water Conservancy and Hydro Power. APPLICATION OF A MULTI-LAYER RADIAL BASIS NETWORK MODEL IN CALCULATION OF SPECIFIC ENTHALPY FOR EXHAUST STEAM FROM THE FINAL STAGE OF STEAM TURBINE[J]. Thermal Power Generation, 2009, 38(7): 80-82.
DOI：

ZHANG Li-ping1, XU Qi1, WANG Wei-feng21.North China College of Water Conservancy and Hydro Power. APPLICATION OF A MULTI-LAYER RADIAL BASIS NETWORK MODEL IN CALCULATION OF SPECIFIC ENTHALPY FOR EXHAUST STEAM FROM THE FINAL STAGE OF STEAM TURBINE[J]. Thermal Power Generation, 2009, 38(7): 80-82. DOI：

摘要

现有的汽轮机末级排汽比焓计算模型存在一定的局限性

对此提出了一种改进的径向基(RBF)网络模型来计算汽轮机的排汽比焓值。计算结果表明

该模型收敛速度快

运算简便

预测精度较高

具有良好的实时性和有效性。采用此模型对某电厂的一台300MW机组汽轮机末级排汽比焓进行计算

其预测值分别为2 366.8 kJ/kg和2 377.2kJ/kg

而试验值分别为2 370.5 kJ/kg和2 375.1 kJ/kg

绝对误差分别为3.7 kJ/kg和2.1 kJ/kg

完全满足应用要求。

Abstract

Owing to certain limitation of existing model for calculating the specific enthalpy of exhaust steam from final stage of steam turbine

a modified radial basis network model has been established

which can be used for calculating the specific enthalpy value of exhaust steam from steam turbines.Result of calculation shows that the modified model has rapid converging speed

being easy and convenient in operation

having higher precision of prediction

boasting good behavior of real-time and effectiveness.The specific enthalpy of exhaust steam from final stage of steam turbine for a 300 MW unit in one power plant has been calculated by using the said model

the predicted values are 2 366.8 kJ/kg and 2 377.2 kJ/kg respectively

the tested value being 2 370.3 kJ/kg and 2 375.1 kJ/kg respectively

the absolute error being 3.7 kJ/kg and 2.1 kJ/kg respectively

satisfying the requirement in engineering.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

PROCESSING METHODS FOR CONDITION CURVES OF LOW-PRESSURE CYLINDER IN TURBINE PERFORMANCE ACCEPTANCE TEST

Performance analysis on primary frequency regulation for a 300MW unit and the verification

Relationship between main steam flow and regenerative extraction steam flow in steam turbines

SIMPLIFIED FINITEELEMENT CALCULATION MODEL OF TEMPERATURE FIELD FOR STEAM TURBINE ROTOR

APPLICATION OF SOLID SELF-LUBRICATING TECHNOLOGY IN POWER PLANTS

Related Author

Yang Hai-sheng1

GUO Jiang-long1

MENG Xiang-ming2(1.Hebei Provincial Electric Power Research Institute

SHENG Kai

LI Yong

WANG Shuai

CAO Lihua

LUO Juan

Related Institution

Hebei Electric Power Research Institute

North China Electric Power Design Institute Engineering Co., Ltd

Hunan Electric Power Company Scientific Research Institute

School of Energy and Power Engineering, Northeast Electric Power University

Wuhan University

AI问答

⁰