The abrasion properties of wear-resistant adhesive coatings have been studied on self-created abrasion test facility. The results show that the abrasion of coatings was influenced by many factors

such as attack angle

impact speed

and abradant dosage etc. The maximum abrasion rate was appeared at attack angle to be 75°. When the attack angle was small

the abrasion was mainly appeared as delamination of slices on the order of organic matters in the coating; while the attack angle was large

except the abrasion appeared as delamination of slices on the said order

there are also fillers’ serious breaking and peeling off due to elastically collapsing and cracking of organic matters in the coating.