SHAFTING VIBRATION ANALYSIS AND DYNAMIC BALANCING IN THE FIELD OF A PULSED MOTOR-DRIVEN GENERATOR

WANG Hai-bing1; XUAN Wei-min1; RAN Long-mao2; LI Hua-jun1; WANG Fen1; LI Zhi-jian1 1.South-West China Physical Research Institute Of Nuclear Industry

doi:10.19666/j.rlfd.2008.01.023

English

您当前的位置：

首页 >

文章列表页 >

SHAFTING VIBRATION ANALYSIS AND DYNAMIC BALANCING IN THE FIELD OF A PULSED MOTOR-DRIVEN GENERATOR

Thermal Power Generation Issue 1, Pages: 89-91(2008)

更新时间：2025-09-28

- SHAFTING VIBRATION ANALYSIS AND DYNAMIC BALANCING IN THE FIELD OF A PULSED MOTOR-DRIVEN GENERATOR
- 作者机构：
  
  1. 核工业西南物理研究院
  2. 东方电站技改有限公司
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.2008.01.023
  CLC： TM621.3
- Published：2008
- 稿件说明：
移动端阅览
WANG Hai-bing1, XUAN Wei-min1, RAN Long-mao2, et al. SHAFTING VIBRATION ANALYSIS AND DYNAMIC BALANCING IN THE FIELD OF A PULSED MOTOR-DRIVEN GENERATOR[J]. Thermal Power Generation, 2008, (1): 89-91.
DOI：

WANG Hai-bing1, XUAN Wei-min1, RAN Long-mao2, et al. SHAFTING VIBRATION ANALYSIS AND DYNAMIC BALANCING IN THE FIELD OF A PULSED MOTOR-DRIVEN GENERATOR[J]. Thermal Power Generation, 2008, (1): 89-91. DOI： 10.19666/j.rlfd.2008.01.023.

摘要

1台125MVA脉冲发电机组在更换电动机转子线圈后

当机组加速接近1800r/min时发生剧烈振动

对电动机转子几次配重平衡均无效果。分析认为

振动原因是转子滑环侧外伸端太长。在对转子外伸端进行配重后

脉冲发电机组的轴系振动完全达到了要求

最大的轴承振动值在一阶临界转速(1800r/min)时小于35μm

在2990r/min时小于25μm。

Abstract

After replacement of the rotor windings of the a synchronous motor

severe vibration occurred on a 125 MVA pulsed motor-driven Generator as it sped up to near 1800 r/min.Counter-weight balancing of the motor rotor for several times

but effectiveness hadn't obtained.It is believed from analysis that the cause of vibration may be the extension end with slip ring of the rotor is too long.After counter weighting on the extension end of the rotor

shafting vibration of the pulsed motor-driven generator can meet all the requirements.The max.vibration peak-value of the bearing is less than 35 μm under the first order critical speed of 1800 r/min

and less than 25 μm under 2980 r/m.

关键词

Keywords

references

Views

128

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

SIMPLIFIED FINITEELEMENT CALCULATION MODEL OF TEMPERATURE FIELD FOR STEAM TURBINE ROTOR

DEVELOPMENT OF PORTABLE DYNAMIC BALANCING AND VIBRATION ANALYSING SYSTEM FOR ROTARY MACHINES

CAUSE ANALYSIS OF ABNORMAL LOW-PRESSURE DIFFERENTIAL EXPANSION FOR 125 MW STEAM TURBINE AND REMEDY THEREOF

TEMPERATURE MONITORING SYSTEM FOR STEAM TURBINE ROTOR BASED ON LABVIEW

INFLUENCE OF ELASTIC SLOT DEPTH AT THE FOOT OF GOVERNING STAGE UPON THERMAL STRESS OF THE ROTOR

Related Author

QI Haitao

HU Niansu

LUO Juan

Wuhan 430074

HE Gou-qiang (Central China University of Science & Technology

HUANG Shu-hong

ZHANG Jin-ping

ZENG Qing-quan Lianzhou Power Plant

Related Institution

Wuhan University

Huazhong University of Science and Technology

Lianzhou Power Plant

School of Mechanical and Electrical Engineering, Wuhan University of Technology

AI问答

⁰