SIMULATION STUDY ON SNCR FOR NOx REMOVAL FROM CHAIN-GRATE FURNACE

XU Bo; ZHANG Yan-wen; CAI Ning-shengKey Laboratory of Thermal Science and Power Engineering of Educational Ministry

doi:10.19666/j.rlfd.2009.03.005

English

您当前的位置：

首页 >

文章列表页 >

SIMULATION STUDY ON SNCR FOR NOx REMOVAL FROM CHAIN-GRATE FURNACE

Thermal Power Generation Vol. 38, Issue 3, Pages: 18-25(2009)

更新时间：2025-09-28

- SIMULATION STUDY ON SNCR FOR NOx REMOVAL FROM CHAIN-GRATE FURNACE
- 作者机构：
  
  清华大学热科学与动力工程教育部重点实验室
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.2009.03.005
  CLC： TK227.1
- Published：2009
- 稿件说明：
移动端阅览
XU Bo, ZHANG Yan-wen, CAI Ning-shengKey Laboratory of Thermal Science and Power Engineering of Educational Ministry. SIMULATION STUDY ON SNCR FOR NOx REMOVAL FROM CHAIN-GRATE FURNACE[J]. Thermal Power Generation, 2009, 38(3): 18-25.
DOI：

XU Bo, ZHANG Yan-wen, CAI Ning-shengKey Laboratory of Thermal Science and Power Engineering of Educational Ministry. SIMULATION STUDY ON SNCR FOR NOx REMOVAL FROM CHAIN-GRATE FURNACE[J]. Thermal Power Generation, 2009, 38(3): 18-25. DOI： 10.19666/j.rlfd.2009.03.005.

摘要

建立1台35 t/h链条炉煤层燃烧过程的数学模型

将模拟得到的气体温度分布及其组分浓度分布作为炉膛空间数值模拟的边界条件

采用计算流体力学软件FLUENT对链条炉内的温度和流场分布进行模拟

并以此为基础对该锅炉的选择性非催化还原(SNCR)脱除NOx过程进行初步设计。模拟结果与实测数据的对比表明

所建的煤燃烧模型可较准确地模拟和预测典型链条炉的燃烧过程。由模拟结果可知

常规链条炉SNCR脱除NOx过程中

适宜温度区狭窄

烟气停留时间较短

因此NOx脱除率较低。在相同工况下

加入适量甲烷可使氮氧化物脱除效率提高9%左右

氨泄漏降低至50μL/L。

Abstract

A mathematical model for combustion process in chain-grate furnace of a 35 t/h boiler has been established

taking the gas temperature distribustion and concentration of flue gas comstituents as the boundary conditions for simulation space in the furnace

the temperature and flow field distribution have been simulated by using a computational fluid dynamics software FLUENT and the Selective Non-catalytic Reduction(SNCR) process of the NOx removal in a chain-grate furnace being designed primarily.The comparison of simulated results with actually measured data shows that the typical combustion process on a chain-grate can be simulated and predicted by using the established combustion model.In conventional SNCR process of NOx removal

the space of suitable temperature regions is narrow

the residence time of flue gas in the furnace being shorter

hence

the removal efficiency being lower

but the NOx removal efficiency can be enhanced in a similar operation by suitably adding methane

the NOx removal efficiency can be enheanced by about 9%

and the ammonia leakage can be lowered to 50 μL/L.

关键词

Keywords

references

Views

527

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

SNCR denitrification technology for a 600 t/d MSW incinerator

Heat-mass transfer and chemical reaction characteristics during carbon dioxide absorption by amine solution in spray scrubber

ADVAHCEMENT AND ENGINEERING APPLICATION OF FLUE GAS DENITRIFICATION TECHNOLOGY BY USING SELECTIVE CATALYTIC REDUCTION METHOD

DESCRIPTION OF FLUE GAS DENITRIFICATION TECHNOLOGY IN THERMAL POWER PLANTS

TURE BY USING MODUIED ACTIVATED CARBON FIBERS

Related Author

CAI Jiecong1

CHEN Zhenchao2 1.Zhejiang Electric Power Test and Research Institute

ZHU Hongqing

GUO Feng

QU Jiangyuan

ZHANG Qiang

XU Shishen

WANG Zhiqiang

Related Institution

Zhejiang Electric Power Test and Research Institute

Department of Energy Engineering, Zhejiang University

National Nuclear Power Planning and Design Institute Co., Ltd

Guodian Thermal Power Research Institute

Xi'an Jiaotong University

AI问答

⁰