Effect of double rows of film holes interaction on film cooling efficiency

LIN Zeqin; WEN Tao; WANG Yuqing

doi:10.19666/j.rlfd.202307117

English

您当前的位置：

首页 >

文章列表页 >

Effect of double rows of film holes interaction on film cooling efficiency

Thermal Power Generation Vol. 53, Issue 2, Pages: 78-85(2024)

更新时间：2025-09-28

- Effect of double rows of film holes interaction on film cooling efficiency
- 作者机构：
  
  1. 华中科技大学机械科学与工程学院
  2. 广东理工职业学院机器人学院
  3. 太原理工大学机械与运载工程学院
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.202307117
  CLC： TM621
- Published：2024
- 稿件说明：
移动端阅览
LIN Zeqin, WEN Tao, WANG Yuqing. Effect of double rows of film holes interaction on film cooling efficiency[J]. Thermal Power Generation, 2024, 53(2): 78-85.
DOI：

LIN Zeqin, WEN Tao, WANG Yuqing. Effect of double rows of film holes interaction on film cooling efficiency[J]. Thermal Power Generation, 2024, 53(2): 78-85. DOI： 10.19666/j.rlfd.202307117.

摘要

采用高精度红外热像仪测量了平板气膜冷却效率，比较了双叉排孔和单排孔气膜冷却效率，分析了孔间的相互作用，以及吹风比（M=0.65、1.00、1.50）和密度比（DR=1.0

1.5）对气膜冷却效率的影响；同时还采用数值计算方法比较了气膜冷却下的流场。结果表明：单排气膜孔冷却效率随着吹风比的增加而降低，但是双叉排气膜孔冷却效率大大提高，且随着吹风比的增加而增加，但是在展向气膜覆盖效果变差；增加密度比可以提高气膜冷却效率，但是双叉排孔和吹风比的影响相对密度比更大；双叉排孔相比于单排孔，冷却气流在孔下游形成了反肾形涡，较好抑制了气膜吹离。

Abstract

The cooling efficiency of flat film was measured using a high-precision infrared thermal imager

and the film cooling efficiency between double-cross-row holes and single row holes is compared. The interaction between film holes and the influence of blowing ratio(M=0.65

1.0

1.5) and density ratio(DR=1.0

1.5) on the cooling efficiency was analyzed. Moreover

the flow field with film cooling was compared using numerical calculation methods. The results show that

with the increase of the blowing ratio

the cooling efficiency of the single row holes decreases while that of the double-cross-row holes improved greatly

but the film coverage effect at the spanwise direction deteriorates. Increasing the density ratio will improve the cooling performance. However

the influence of double rows of film holes and blow ratio is much higher on the cooling effectiveness

compared with the density ratio. For the double rows of film holes cooling

the cooling jet forms a reverse kidney-shaped vortex downstream of the holes

which will prevent the jet blowing away from the cooling wall.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

Influence of coolant crossflow on film cooling effectiveness of one-inlet and double-outlet injection holes

Investigation on film cooling effectiveness of fanned hole with broad outlet

Effect of wall thickness on film cooling effectiveness: numerical simulation

Numerical study on cooling performance of Nekomimi film holes

Study on film cooling flow characteristics of film holes in rounded corner crater

Related Author

ZHAO Guochang

KOU Zhihai

LI Guangchao

ZHANG Wei

KOU Zhihai

ZHANG Wei

CHEN Yukai

LI Guangchao

Related Institution

School of Aerospace Engineering, Shenyang University of Aeronautics and Astronautics

Liaoning Province Key Laboratory of Advanced Testing Technology for Aerospace Propulsion Systems, Shenyang University of Aeronautics and Astronautics

Xi'an Thermal Power Research Institute Co., Ltd

School of Energy and Environment, Shenyang University of Aeronautics and Astronautics

School of Metallurgy, Northeastern University

AI问答

⁰