Effect of different flow channel structures on heat transfer performance of lead-bismuth eutectic-supercritical carbon dioxide heat exchangers

倪依柯; 李红智; 杨玉; 张一帆; 吴帅帅; 韩煜航; 吴家荣

doi:10.19666/j.rlfd.202410227

English

您当前的位置：

首页 >

文章列表页 >

Effect of different flow channel structures on heat transfer performance of lead-bismuth eutectic-supercritical carbon dioxide heat exchangers

Thermal Power Generation Vol. 54, Issue 7, Pages: 135-143(2025)

更新时间：2026-08-11

- Effect of different flow channel structures on heat transfer performance of lead-bismuth eutectic-supercritical carbon dioxide heat exchangers
- 作者机构：
  
  西安热工研究院有限公司
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.202410227
  CLC： TK172;TL333
- Published：2025
- 稿件说明：
移动端阅览
[1]倪依柯,李红智,杨玉,等.不同流道结构对铅铋-超临界二氧化碳换热器换热性能的影响[J],2025,54(07):135-143.
[1]倪依柯,李红智,杨玉,等.不同流道结构对铅铋-超临界二氧化碳换热器换热性能的影响[J],2025,54(07):135-143. DOI： 10.19666/j.rlfd.202410227.

DOI：10.19666/j.rlfd.202410227.

摘要

提高液态铅铋合金(LBE)与超临界二氧化碳(S-CO2)之间的换热效率对于推动先进核能系统的发展具有重要意义。通过数值模拟方法，研究了直型、翼型、S型、Z型4种几何模型流道结构印刷电路板式换热器(printed circuit heat exchanger

PCHE)的换热性能。结果表明，换热器冷侧热阻明显高于热侧热阻，直通道PCHE的热侧传热系数平均为冷侧的26.2倍。在固定热侧流道结构的条件下，重点探讨了不同冷侧流道结构对PCHE换热性能的影响。结果表明，与直型流道相比，Z型流道、S型流道和翼型流道的换热量分别提高了23.3%、22.2%和10.6%，等泵功指标分别提高了1.48倍、1.68倍和1.44倍。此外，对比了当冷侧流量提升20%时不同PCHE的动态性能，其中直通道的重新平衡时间最短，相比换热量的提升，流体压降损失更显著。研究结果为优化LBE/S-CO2换热器设计提供了理论依据，并对提高下一代核能系统的热效率具有指导意义。

Abstract

Improving the heat transfer efficiency between liquid lead-bismuth eutectic(LBE) and supercritical carbon dioxide(S-CO2) is of great significance for advancing the development of advanced nuclear energy systems. The heat transfer performance of printed circuit heat exchangers(PCHE) with different channel structures(straight shaped

wing-shaped

S-shaped and Z-shaped) is investigated through numerical simulation. The results show that the thermal resistance on cold side of the heat exchanger is significantly higher than that on the hot side

with the average heat transfer coefficient of the hot side in straight-channel PCHE being 26.2 times that of the cold side. Under the condition of a fixed hot-side channel structure

the effects of different cold-side channel structures on PCHE heat transfer performance are explored. The results indicate that

compared with straight channels

the heat transfer of Z-shaped

S-shaped and wing-shaped channels increases by 23.3%

22.2%

and 10.6%

respectively

while the specific pumping power improves by 1.48 times

1.68 times

and 1.44 times

respectively. In addition

the dynamic performance of different PCHE designs when the cold-side flow rate increases by 20% is compared

revealing that the straight-channel PCHE has the shortest rebalancing time. The pressure drop loss is more significant than the improvement in heat transfer. These findings provide theoretical guidance for optimizing the design of LBE/S-CO2 heat exchangers and contribute to enhancing the thermal efficiency of next-generation nuclear energy systems.

关键词

Keywords

references

WANG G. A review of recent numerical and experimental research progress on CDA safety analysis of LBE-/lead-cooled fast reactors[J]. Annals of Nuclear Energy, 2017, 110:1139-1147.

姜涛,李明佳,梁继越,等.用于水下航行器的铅铋堆S-CO2循环发电系统热力学及动态特性分析[J].中国电机工程学报, 2023, 43(11):4138-4150.JIANG Tao, LI Mingjia, LIANG Jiyue, et al.Thermodynamic and dynamic characteristics analysis of the S-CO2 cycle power generation system integrated with lead-bismuth cooled reactor for underwater vehicle[J].Proceedings of the CSEE, 2023, 43(11):4138-4150.

陆定晟,魏诗颖,王成龙,等.车载运动条件下铅铋堆LESMOR热工安全特性分析[J].原子能科学技术,2023, 57(1):111-123.LU Dingsheng, WEI Shiying, WANG Chenglong, et al.Analysis on thermal-hydraulic characteristics of leadbismuth reactor system LESMOR under vehicle-mounted motion[J]. Atomic Energy Science and Technology,2023, 57(1):111-123.

魏诗颖,王成龙,田文喜,等.铅基快堆关键热工水力问题研究综述[J].原子能科学技术, 2019, 53(2):326-336.WEI Shiying, WANG Chenglong, TIAN Wenxi, et al.Research progress in key thermal-hydraulic issues of lead-based fast reactor[J]. Atomic Energy Science and Technology, 2019, 53(2):326-336.

徐进良,刘超,孙恩慧,等.超临界二氧化碳动力循环研究进展及展望[J].热力发电, 2020, 49(10):1-10.XU Jinliang, LIU Chao, SUN Enhui, et al. Review and perspective of supercritical carbon dioxide power cycles[J]. Thermal Power Generation, 2020, 49(10):1-10.

XU J, SUN E, LI M, et al. Key issues and solution strategies for supercritical carbon dioxide coal fired power plant[J]. Energy, 2018, 157:227-246.

郭亚龙,刘铠瑞,王超,等. S-CO2发电系统负荷跟随控制策略及动态特性研究[J].中国电机工程学报,2023, 43(23):9149-9161.GUO Yalong, LIU Kairui , WANG Chao, et al. Study on load following control strategy and dynamic characteristics of S-CO2 power generation system[J].Proceedings of the CSEE, 2023, 43(23):9149-9161.

崔大伟,宋磊,林继铭.超临界二氧化碳与液态铅铋合金耦合换热模型与换热特性研究[J].热力发电,2022, 51(6):59-67.CUI Dawei, SONG Lei, LIN Jiming. Study on coupling heat transfer model and characteristics of supercritical carbon dioxide and liquid lead-bismuth eutectic[J].Thermal Power Generation, 2022, 51(6):59-67.

LI X, SU X, GU L, et al. Investigation on thermo-hydraulic characteristic of lead-bismuth eutectic and supercritical carbon dioxide in a straight-channel printed circuit heat exchanger[J]. Applied Thermal Engineering, 2024, 240:122294.

MAO S, ZHOU T, LIU W, et al. Study on particle deposition performance in liquid lead-bismuth eutectic and supercritical CO2 heat exchanger[J]. Energy, 2023,285:129381.

WANG S, LU Z, ZHANG Q, et al. Investigation on heat transfer characteristics of Pb-Bi/S-CO2 PCHE with different channel structures[J]. Progress in Nuclear Energy, 2023, 161:104721.

刘妍君,邵应娟,钟文琪.翼型印刷电路板式换热器内流动与换热特性[J].东南大学学报(自然科学版),2022, 52(2):320-327.LIU Yanjun, SHAO Yingjuan, ZHONG Wenqi. Flow and heat transfer characteristics of airfoil printed circuit heat exchangers[J]. Journal of Southeast University(Natural Science Edition), 2022, 52(2):320-327.

张蓉芳,赵民富,王晓丁,等.钠冷快堆耦合超临界二氧化碳布雷顿循环中的PCHE研究进展[J].热力发电,2020, 49(10):48-58.ZHANG Rongfang, ZHAO MinFu, WANG Xiaoding,et al. Study on PCHE in advances sodium cold fast reactor coupled supercritical carbon dioxide Brayton cycle:a review[J]. Thermal Power Generation, 2020,49(10):48-58.

刘书涵,雷贤良,刘吉安,等.非对称紧凑式换热器内超临界二氧化碳与液态铅铋合金耦合换热特性研究[J].热力发电, 2023, 52(6):24-34.LIU Shuhan, LEI Xianliang, LIU Ji’an, et al. Coupled heat transfer characteristics of supercritical carbon dioxide and liquid lead-bismuth-eutectic in asymmetric compact heat exchange[J]. Thermal Power Generation,2023, 52(6):24-34.

ZHANG J, LI N. Review of the studies on fundamental issues in LBE corrosion[J]. Journal of nuclear materials,2008, 373(1/2/33):351-377.

ZAHEED L, JACHUCK R J. Review of polymer compact heat exchangers, with special emphasis on a polymer film unit[J]. Applied Thermal Engineering,2004, 24(16):2323-2358.

SHI Q, SONG C, PAN W, et al. Flow and heat transfer characteristics and comprehensive evaluation of asymmetric plate heat exchangers for centralized heat supply[J]. Applied Thermal Engineering, 2024, 257:124306.

NIKNAM S A, MORTAZAVI M, LI D. Additively manufactured heat exchangers:a review on opportunities and challenges[J]. The International Journal of Advanced Manufacturing Technology, 2021, 112(3):601-618.

KIM M, HA M, MIN J, et al. Numerical study on the cross-corrugated primary surface heat exchanger having asymmetric cross-sectional profiles for advanced intercooled-cycle aero engines[J]. International Journal of Heat and Mass Transfer, 2013, 66:139-153.

ZHANG Q, LI H, LIU J, et al. Numerical investigation of different heat transfer behaviors of supercritical CO2in a large vertical tube[J]. International Journal of Heat and Mass Transfer, 2020, 147:118944.

DU X, LV Z, YU X, et al. Heat transfer of supercritical CO2 in vertical round tube:A considerate turbulent Prandtl number modification[J]. Energy, 2020, 192:116612.

刘凯,彭军,赵富龙,等.直流道PCHE内S-CO2与铅铋合金耦合换热特性数值分析[J].哈尔滨工程大学学报, 2023, 44(12):2103-2111.LIU Kai, PENG Jun, ZHAO Fulong, et al. A numerical analysis of the S-CO2 coupled with lead-bismuth eutectic heat transfer characteristics in straight channel PCHE[J].Journal of Harbin Engineering University, 2023, 44(12):2103-2111.

王琛,王成龙,张衍,等.液态铅铋合金管内流动传热特性研究[J].原子能科学技术, 2021, 55(5):822-828.WANG Chen, WANG Chenglong, ZHANG Yan, et al.Investigation on flow and heat transfer characteristics of lead-bismuth eutectic alloy[J]. Atomic Energy Science and Technology, 2021, 55(5):822-828.

CHENG X, TAK N. Investigation on turbulent heat transfer to lead–bismuth eutectic flows in circular tubes for nuclear applications[J]. Nuclear Engineering and Design, 2006, 236(4):385-393.

MORITA K, MASCHEK W, FLAD M, et al.Thermophysical properties of lead-bismuth eutectic alloy in reactor safety analysis[J]. Journal of Nuclear Science and Technology, 2006, 43(5):526-536.

ZHANG Y, WANG C, CAI R, et al. Experimental investigation on flow and heat transfer characteristics of lead-bismuth eutectic in circular tubes[J]. Applied Thermal Engineering, 2020, 180:115820.

LI H, ZHANG Y, ZHANG L, et al. PDF-based modeling on the turbulent convection heat transfer of supercritical CO2 in the printed circuit heat exchangers for the supercritical CO2 Brayton cycle[J]. International Journal of Heat and Mass Transfer, 2016, 98:204-218.

吴家荣,李红智,杨玉,等.类菱形肋片流道印刷电路板换热器热工水力特性研究[J].热力发电, 2023,52(11):20-28.WU Jiarong, LI Hongzhi, YANG Yu, et al. Study on the thermal hydraulic characteristics of the printed circuit heat exchanger with rhombic fin channels[J]. Thermal Power Generation, 2023, 52(11):20-28.

过增元.换热器中的场协同原则及其应用[J].机械工程学报, 2003(12):1-9.GUO Zengyuan. Principle of field coordination in heat exchangers and its applications[J]. Chinese Journal of Mechanical Engineering, 2003(12):1-9.

丁源,童自翔,王文奇,等.超临界二氧化碳印刷电路板式换热器设计及应用研究[J].工程热物理学报,2022, 43(5):1351-1356.DING Yuan, TONG Zixiang, WANG Wenqi, et al. Study on the design and applications of supercritical carbon dioxide printed circuit heat exchangers[J]. Journal of Engineering Thermophysics, 2022, 43(5):1351-1356.

安风霞,杨玉,吴帅帅,等.印刷电路板换热器芯体尺寸多目标优化研究[J].电力科技与环保, 2023, 39(4):345-352.AN Fengxia, YANG Yu, WU Shuaishuai, et al.Multi-objective optimization of the core size of a printed circuit heat exchanger[J]. Electric Power Technology and Environmental Protection, 2023, 39(4):345-352.

KIM D E, KIM M H, CHA J E, et al. Numerical investigation on thermal–hydraulic performance of new printed circuit heat exchanger model[J]. Nuclear Engineering and Design, 2008, 238(12):3269-3276.

TSUZUKI N, KATO Y, ISHIDUKA T. High performance printed circuit heat exchanger[J]. Applied Thermal Engineering, 2007, 27(10):1702-1707.

伍权,廖海燕,张忠梅,等.印刷电路板换热器中不同流道的流动换热性能研究[J].工程热物理学报, 2023,44(9):2521-2531.WU Quan, LIAO Haiyan, ZHANG Zhongmei, et al.Study on the thermal-hydraulic performance of different channels in printed circuit heat exchanger[J]. Journal of Engineering Thermophysics, 2023, 44(9):2521-2531.

Views

1155

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

Simulation study on dynamic characteristics of supercritical carbon dioxide/lead-bismuth coupled heat exchanger

Study on abnormal heat transfer behavior of supercritical carbon dioxide at low mass flow rate in horizontal tube

基于知识图谱和检索增强生成的电站设备故障知识问答

基于孔隙尺度的随机泡沫陶瓷结构尾流湍流流场模拟

液态空气储能系统固相蓄冷技术研究进展

Related Author

NI Yike

LI Hongzhi

YANG Yu

ZHANG Yifan

WU Jiarong

WU Shuaishuai

HAN Yuhang

LI Yanfu

Related Institution

Middling coal Science and Engineering Group Shenyang Research Institute Co., Ltd

College of Petroleum and Natural Gas Engineering, Liaoning University of Petrochemical Technology

⁰