天然气富氧燃烧烟气压缩净化协同脱碳脱硝性能模拟

杨少龙; 付爱军; 何佳伟; 李小姗; 罗聪; 邬凡; 张立麒

doi:10.19666/j.rlfd.202505085

English

您当前的位置：

首页 >

文章列表页 >

天然气富氧燃烧烟气压缩净化协同脱碳脱硝性能模拟

Thermal Power Generation Vol. 55, Issue 3, Pages: 28-35(2026)

更新时间：2026-08-07

- 天然气富氧燃烧烟气压缩净化协同脱碳脱硝性能模拟
- 作者机构：
  
  华中科技大学煤燃烧与低碳利用全国重点实验室
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.202505085
  CLC： X701
- Published：2026
- 稿件说明：
移动端阅览
[1]杨少龙,付爱军,何佳伟,等.天然气富氧燃烧烟气压缩净化协同脱碳脱硝性能模拟[J].热力发电,2026,55(03):28-35.
[1]杨少龙,付爱军,何佳伟,等.天然气富氧燃烧烟气压缩净化协同脱碳脱硝性能模拟[J].热力发电,2026,55(03):28-35. DOI： 10.19666/j.rlfd.202505085.

DOI：10.19666/j.rlfd.202505085.

摘要

【目的】为满足减污降碳与低能耗目标，针对天然气富氧燃烧烟气，探究压缩净化协同脱碳脱硝工艺的适用条件与关键操作参数，以实现高效的碳捕集与污染物控制。【方法】利用Aspen Plus建立富氧燃烧烟气压缩净化工艺模型，通过模拟分析工艺性能及关键影响因素，重点考察CO

体积分数、系统压力等参数对CO

液化提纯及NO

脱除效果的综合影响。【结果】CO

回收率显著依赖于初始烟气中CO

的体积分数，为实现CO

回收率≥80%

体积分数需高于60%；对高体积分数CO

烟气(60%)的研究表明，系统压力是协同脱硝与CO

提纯的关键参数；在系统压力为2.8 MPa时，NO

脱除率94%，产品CO

纯度≥95%

回收率≥80%，且单位综合电耗最低，为120.1 kW·h/t CO

。【结论】富氧燃烧烟气压缩净化技术适用于初始烟气中CO

体积分数较高的烟气条件。通过优化系统压力，可在低能耗下同步实现高效的碳捕集与NO

深度脱除，为天然气富氧燃烧系统的减污降碳与资源化利用提供可行方案。

Abstract

[Objective

]

This study aims to investigate the applicable conditions and key operational parameters for an integrated compression

purification

decarbonization

and denitrification process applied to natural gas oxy-fuel combustion flue gas. The research seeks to clarify the technical feasibility and performance boundaries of this process for achieving efficient carbon dioxide(CO

) capture coupled with deep removal of nitrogen oxides(NO

)

providing a practical solution for integrated carbon capture and pollutant control in natural gas oxy-fuel combustion systems. [Met

hods

]

A steady-state process model for the compression and purification of oxy-fuel combustion flue gas was developed using Aspen Plus

which accurately describes the thermodynamic behavior of the high-pressure

multi-component gas mixture. Through systematic simulation and parametric sensitivity analysis

the study focused on the combined effects of the initial CO

volume fraction in the flue gas and the system operating pressure on process performance. Key performance indicators evaluated include the CO

recovery rate

liquid CO

product purity

removal efficiency

and specific comprehensive power consumption. [Results

]

The simulation results establish a definitive and strong correlation between the CO

recovery efficiency and the initial concentration of CO

in the flue gas. A clear technical threshold is identified: to attain a CO

recovery rate of 80% or higher

the initial CO

volume fraction must exceed 60%. This finding defines a primary applicability criterion for the compression-purification approach. Subsequent analysis concentrated on flue gas compositions meeting this highconcentration criterion(60% CO

). Within this domain

the system operating pressure emerges as the most influential parameter governing the synergistic relationship between NO

abatement and CO

purification efficiency. Detailed parametric optimization reveals a distinct optimal operating pressure of 2.8 MPa. Operating at this pressure enables the process to achieve superior performance across all key metrics: the NO

removal efficiency surpasses 94%

the purified liquid CO

product attains a purity of 95% or higher

and the target CO

recovery rate of ≥80% is reliably maintained. Crucially

this operating point corresponds precisely to the minimum in specific power consumption

which is quantified at 120.1 kW·h per ton of CO

captured. This represents an optimal tra

de-off

balancing high environmental performance with minimized energy penalty

a critical factor for economic feasibility. [Conclusion

]

The compression and purification technology is suitable for treating oxy-fuel combustion flue gas with a high initial CO

volume fraction(60%). By optimizing the system pressure to 2.8 MPa

efficient CO

capture and deep NO

removal can be achieved simultaneously with low energy consumption. This study clarifies the key performance thresholds and optimal operating parameters for this integrated process

providing a concrete and feasible technical solution for achieving pollution reduction

carbon mitigation

and resource utilization in natural gas oxy-fuel combustion systems.

关键词

Keywords

references

邹才能,林敏捷,马锋,等.碳中和目标下中国天然气工业进展,挑战及对策[J].石油勘探与开发, 2024,51(2):418-435.ZOU Caineng, LIN Minjie, MA Feng, et al. Progress,challenges and countermeasures of China’s natural gas industry under the carbon neutral target[J]. Petroleum Exploration and Development, 2024, 51(2):418-435.

陈思锭,张哲,王春燕,等.浅谈CCS/CCUS中CO2管道输送对气质的要求[J].油气与新能源, 2022, 34(2):71-81.CHEN Siding, ZHANG Zhe, WANG Chunyan. Gas requirements for CO2 pipeline transport in CCS/CCUS[J].Oil, Gas and New Energy, 2022, 34(2):71-81.

HONG W Y. A techno-economic review on carbon capture, utilisation and storage systems for achieving a net-zero CO2 emissions future[J]. Carbon Capture Science&Technology, 2022, 3:100044.

郭军军,张泰,李鹏飞,等.中国煤粉富氧燃烧的工业示范进展及展望[J].中国电机工程学报, 2020, 41(4):1197-1208.GUO Junjun, ZHANG Tai, LI Pengfei, et al. Industrial demonstration progress and prospects of pulverized coal oxy-fuel combustion in China[J]. Proceedings of the CSEE, 2020, 41(4):1197-1208

VOLDSUND M, GARDARSDOTTIR S O, DE LENA E,et al. Comparison of technologies for CO2 capture from cement production:Part 1:technical evaluation[J].Energies, 2019, 12(3):559.

ZHANG W, ZHANG J H, XUE Z L. Exergy analyses of the oxygen blast furnace with top gas recycling process[J].Energy, 2017, 121:135-146.

ZANGANEH K E, SHAFEEN A, SALVADOR C, et al.CO2 processing and multi-pollutant control for oxy-fuel combustion systems using an advanced CO2 capture and compression unit(CO2CCU)[J]. Energy Procedia, 2011,4:1018-1025.

KIM S, JUNG P G, LIM Y I, et al. CO2 compression and liquefaction processes using a distillation column for the flexible operation of transportation[J]. Processes, 2024,12(1):115.

DARDE A, PRABHAKAR R, TRANIER J P, et al. Air separation and flue gas compression and purification units for oxy-coal combustion systems[J]. Energy Procedia,2009, 1(1):527-534.

WHITE V, ALLAM R J, MILLER E J. Purification of oxyfuel-derived CO2 for Sequestration or EOR[J]. Energy Procedia, 2006, 1:399-406.

WHITE V, TORRENTE-MURCIANO L, STURGEON D, et al. Purification of oxyfuel-derived CO2[J]. Energy Procedia, 2009, 1(1):399-406.

ALLAM J. Removal of sulfur dioxide(SO2)and nitrogen oxides(NOx)from gaseous carbon dioxide produced in an oxyfuel combustion process such as coal-fired power plants by transforming with oxygen and water into sulfuric acid and nitric acid, for capture of CO2 in global warming abatement:US7416716[P]. 2008-08-26[2025-06-19].

STOKIE D, VERMA P, KUMFER B M, et al. Pilot-scale testing of direct contact cooler for the removal of SOx and NOx from the flue gas of pressurized oxy-coal combustion[J]. Chemical Engineering Journal, 2021, 414:128757.

LI X S, HUANG Q, LUO C, et al. Effects of acidic gases and operation parameters on denitrification in oxy-fuel CO2 compression process[J]. Fuel, 2018, 234:1285-1292.

LI X S, ZHANG L Q, LUO C, et al. Experimental investigation and process simulation of oxy-fuel flue gas denitrification in CO2 compression process[J]. Energy&Fuels, 2018, 32(11):11666-11673.

田龙虎.煤基能源系统CO2分离液化一体化方法研究[D].北京:华北电力大学(北京), 2011:3-11.TIAN Longhu. Research on Integrated CO2 separation and liquefaction methods in coal-based energy systems[D].Beijing:North China Electric Power University(Beijing),2011:3-11.

李延兵,赵瑞,陈寅彪,等.富氧燃烧CO2压缩纯化试验研究[J].动力工程学报, 2016, 36(12):976-981.LI Yanbing, ZHAO Rui, CHEN Yinbiao, et al. Experimental study on CO2 compression and purification in oxyfuel combustion[J]. Journal of Power Engineering, 2016,36(12):976-981.

黄科,谢波,魏义江.一种富氧燃烧烟气中的CO2提纯及液化装置:CN 202547276 U[P]. 2012-11-21[2025-06-19].HUANG Ke, XIE Bo, WEI Yijiang. A CO2 purification and liquefaction device for oxy-fuel combustion flue gas:CN 202547276 U[P]. 2012-11-21[2025-06-19].

DAI G F, ZHANG J Y, ZHANG Y F, et al. Multi-pollutant formation and control in pressurized oxy-combustion:SOx, NOx, particulate matter, and mercury[J]. Engineering, 2024, 39:135-141.

SONG Y H, CHEN C C. Symmetric electrolyte nonrandom two-liquid activity coefficient model[J]. Industrial&Engineering Chemistry Research, 2009, 48(16):7788-7797.

MATHIAS P M. A versatile phase equilibrium equation of state[J]. Industrial&Engineering Chemistry Process Design and Development, 1983, 22(3):385-391.

LARIBI S, DUBOIS L, DE W G, et al. Optimization of the sour compression unit(SCU)process for CO2 purification applied to flue gases coming from oxy-combustion cement industries[J]. Energy Procedia, 2017, 114:458-470.

POSCH S, HAIDER M. Optimization of CO2compression and purification units(CO2CPU)for CCS power plants[J]. Fuel, 2012, 101:254-263.

KOPKE D, EGGERS R. Phase equilibria measurements and their application for the CO2 separation from CO2 rich gases[C]. Proceedings of the IEAGHG International OxyCombustion. Network, Yokohama, 2008.

STANGER R, TING T, SPERO C, et al. Oxyfuel derived CO2 compression experiments with NOx, SOx and mercury removal:experiments involving compression of slip-streams from the callide oxyfuel Project(COP)[J].International Journal of Greenhouse Gas Control, 2015,41:50-59.

PORTER R T J, FAIRWEATHER M, KOLSTER C, et al.Cost and performance of some carbon capture technology options for producing different quality CO2 product streams[J]. International Journal of Greenhouse Gas Control, 2017, 57:185-195.

李伟,刘敦禹,陈军,等.基于鼓泡反应器高压联合脱除富氧燃烧烟气中NOx和SOx的建模分析[J].环境工程, 2019, 37(7):135-141.LI Wei, LIU Dunyu, CHEN Jun, et al. Modelling analysis of NOx and SOx removal from oxygen-enriched combustion flue gas based on high-pressure combined removal in a bubbling reactor[J]. Environmental Engineering, 2019, 37(7):135-141.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Publicity Resources

基于电网约束与关键设备运行特性的风光氢储系统优化配置与经济性研究

基于改进粒子群算法的水电机组振荡抑制控制器参数优化

基于物理信息神经网络的超临界燃煤发电机炉协调系统动态建模研究

掺氢燃烧对SGT800燃气轮机联合循环机组热力性能影响的仿真研究

风轮高度阵风预报模型的验证和优化研究

Related Author

No data

Related Institution

No data

AI问答

⁰