[Objective] In practical energy and chemical engineering systems

pipeline layouts often exhibit complex multi-directional configurations due to equipment arrangement

spatial constraints

and process requirements

rather than simple straight horizontal or vertical sections. This is particularly evident in applications such as compact heat exchangers for supercritical carbon dioxide(S-CO2) Brayton cycles

nuclear reactor cooling circuits

and chemical transport pipelines

where the working fluid frequently undergoes abrupt changes in flow direction. Among these configurations

the L-shaped bend

a classic directional-changing structure that connects horizontal and vertical pipe sections

is especially common and plays a crucial role in achieving spatial redirection of the working fluid. Therefore

investigating the heat transfer characteristics of S-CO2 in L-shaped bends is of significant importance. This study aims to investigate the effect of buoyancy-induced density stratification in a heated horizontal section on the subsequent heat transfer in a vertical upward flow under different experimental parameters. [Methods] An experimental system with high expandability was established

featuring a single-cycle S-CO2 heat transfer test platform utilizing stainless steel circular pipes with adjustable lengths and bend angles. Experiments were conducted to study the flow and heat transfer characteristics of S-CO2 inside a horizontal-to-vertical L-shaped turning pipe. [Results] The experimental results reveal two distinct types of “asymmetric heat transfer deterioration” in the turning pipe: one characterized by asymmetry in the severity of deterioration

and the other by asymmetry in its location. When the wall heat flux is increased

wall temperature peaks indicating heat transfer deterioration appear in the vertical section

with unequal peak values on the two sides

representing asymmetry in severity. A further increase in wall heat flux shifts the deterioration position toward the inlet

while the enthalpy at which deterioration initiates remains unchanged

indicating that the wall heat flux does not affect the onset enthalpy of deterioration. When the heat flux is raised sufficiently for the deterioration to advance to the inlet of the vertical section

the wall temperature peak on the inner side occurs earlier than that on the outer side

demonstrating asymmetry in the location of deterioration. [Conclusion] The study demonstrates that asymmetry in severity originates from non-uniform cross-sectional mass flow distribution caused by temperature stratification extending from the horizontal section. In contrast

asymmetry in location occurs under high-temperature and high-heat-flux conditions due to the earlier fulfillment of deterioration criteria within the inner-side boundary layer. This research elucidates the coupling effect between buoyancy and flow redirection in L-shaped pipes

providing an experimental basis for the design of related heat exchange equipment.