复合涂层气固冲蚀磨损特性研究

何大春; 王跃瑜

doi:10.19666/j.rlfd.2001.06.007

English

您当前的位置：

首页 >

文章列表页 >

复合涂层气固冲蚀磨损特性研究

热力发电 2001年第6期页码：27-29

更新时间：2025-09-28

- 复合涂层气固冲蚀磨损特性研究
- STUDY ON ABRASION PROPERTIES OF COLD SOLIDIFIED POLYMERIC COATINGS
- 作者机构：
  
  1. 安庆石化总厂
  2. 安庆石化总厂,安徽,安庆,246001
  3. ,安徽,安庆,246001
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.2001.06.007
  中图分类号： TG174.4
- 纸质出版：2001
- 稿件说明：
移动端阅览
何大春, 王跃瑜. 复合涂层气固冲蚀磨损特性研究[J]. 热力发电, 2001,(6):27-29.

STUDY ON ABRASION PROPERTIES OF COLD SOLIDIFIED POLYMERIC COATINGS[J]. Thermal Power Generation, 2001, (6): 27-29.
何大春, 王跃瑜. 复合涂层气固冲蚀磨损特性研究[J]. 热力发电, 2001,(6):27-29. DOI： 10.19666/j.rlfd.2001.06.007.

STUDY ON ABRASION PROPERTIES OF COLD SOLIDIFIED POLYMERIC COATINGS[J]. Thermal Power Generation, 2001, (6): 27-29. DOI： 10.19666/j.rlfd.2001.06.007.

摘要

利用自制冲蚀磨损试验装置

研究了耐磨胶粘涂层气固冲蚀磨损的特性。结果表明 :涂层的冲蚀磨损受到攻角、冲速、磨料量等多种因素的影响。最大冲蚀率发生在 75°攻角。低攻角时

涂层以有机体发生不均匀扯离撕裂、呈微米级片层脱落磨损为主 ;高攻角时

涂层以有机体发生弹性溃裂、呈微米级片层脱落和填料严重破碎脱落磨损为主。

Abstract

The abrasion properties of wear-resistant adhesive coatings have been studied on self-created abrasion test facility. The results show that the abrasion of coatings was influenced by many factors

such as attack angle

impact speed

and abradant dosage etc. The maximum abrasion rate was appeared at attack angle to be 75°. When the attack angle was small

the abrasion was mainly appeared as delamination of slices on the order of organic matters in the coating; while the attack angle was large

except the abrasion appeared as delamination of slices on the said order

there are also fillers’ serious breaking and peeling off due to elastically collapsing and cracking of organic matters in the coating.

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

关联资源

暂无数据